The Lithco Correct-A-Plate Addition Pens let pressroom operators add missing image back onto an offset plate — on or off the press. When a plate comes up short in an image area, you make the correction in place and keep printing, instead of pulling the plate and running a new one.
- Works on or off the press — correct plates in place without breaking down the job
- Adds image back to the plate — write in the correct image, let it dry, continue the run
- Simple prep — clean the plate with solvent, dry, correct, dry, then run
- Keeps the run going — avoid pulling and re-imaging a plate over a small drop-out
Technical Specifications
| Product | Lithco Correct-A-Plate Addition Pens | Type | Offset plate image-addition pen |
| Use | Adds missing image to offset plates | Application | On or off the press |
| Directions | Clean plate with solvent and dry; write in correct image; allow image to dry; continue run | ||
